Page 1 of 1

Any interest in a new axonometric set-up tool for Ai?

Posted: Fri Mar 31, 2017 7:03 am
by gregdraws
Hello Everyone,

Many years ago an illustrator colleague of mine devised and put together a stand-alone app that would generate axonometric set-ups for use in easily constructing 3D objects in Adobe Illustrator. This process is similar to the Scale/Shear/Rotate method shown in tutorials on this site, as well as on other sites.

The app uses a Rotate/Scale/Rotate method. In the app, the user chooses the desired view/set-up by entering either the left and right axis angles or, tilt and turn values into the respective fields. As these values are entered, a small cube (representing the resulting axonometric set-up) displays/changes in real time in the app. Once the user has settled on the desired view, the user can then export the rotate/scale/rotate numeric values either to a PDF file or copy to the clipboard (then paste into an Ai file).

I've attached an example of such an export for a simple –20/20° dimetric view/set-up. Some things to note here: The app not only provides the rotate/scale/rotate values for each face in the view, but it also generates the inverse values for each of the respective faces. The inverse values are tremendously useful in situations where the user may want or need to 'back out' an orthographic shape/profile from an existing illustration, photo reference, etc. This allows the user much greater flexibility in moving between ortho and axo elements/views at will. You'll notice that the export also shows details such as tilt, turn, axis angles, and constrain angles. Knowing the constrain angles are especially important when constructing elements and moving said objects in relation to one another in Illustrator. Another feature of the app is that it will also generate the numeric information for off-axis rotations/views just as easily.

It is a very powerful, yet deceptively simple tool for the tech. illustrator working in Adobe Illustrator. Only the two of us and a small handful of our close illustrator colleagues have used it. While there are all sorts of high caliber 3D softwares on the market today, this app bridges the gap between those and Adobe Illustrator. It allows the user to accurately construct infinite axonometric set-ups and objects, without getting bogged down in the mathematics involved or the unwanted bloat and extraneous details resulting from 3D software.

We are looking into the possibility of having someone build an Ai plug-in based upon the existing app. While we realize that such a plug-in would have a narrow user appeal/base, we feel it would be invaluable for those of us who understand what it does. So my question to you: Does this kind of tool appeal to you? If such a plug-in existed, do you envision yourself or other tech. illustrators using it?

Would love to hear any feedback. My apologies for the lengthy post. Thanks for reading.

-Greg

Re: Any interest in a new axonometric set-up tool for Ai?

Posted: Fri Mar 31, 2017 2:55 pm
by JamesProvost
This sounds pretty useful, Greg.

Would it be accurate to describe it as "lite" version of Hot Door CADtools Axonometric Drawing tools? At $349 CADtools is pretty steep if you're only using a few of the tools, and adds a lot of bloat.

Your next question is probably what people are willing to pay for it. I think $25-$50 would make it an impulse buy, and $100 would still be reasonable.

Re: Any interest in a new axonometric set-up tool for Ai?

Posted: Sat Apr 01, 2017 7:53 pm
by gregdraws
JamesProvost wrote:This sounds pretty useful, Greg.

Would it be accurate to describe it as "lite" version of Hot Door CADtools Axonometric Drawing tools? At $349 CADtools is pretty steep if you're only using a few of the tools, and adds a lot of bloat.

Your next question is probably what people are willing to pay for it. I think $25-$50 would make it an impulse buy, and $100 would still be reasonable.

Hi James,
Yes, our app would be similar to the CADtools axonometric interface, but.......better IMO. I've looked at CADtools many times over the years. Have never pulled the trigger, for a few key reasons: It seems to try to do too many things for most users needs. Again, this is my opinion, based upon the types of illustration I typically do. I would use the axonometric tools, and perhaps some of the other drawing tools. But would have zero use for the libraries of trees, etc. As CADtools has done with their Control plug-ins, I'd love to see them offer single plug-ins available for purchase, broken out separately from the complete CADtools package. This way, users could purchase only the specific plug-ins they need, to fit their workflow. Similar to Astute Graphic's model. And $350 is a chunk of change to plunk down for a plug-in that you may only utilize 10% of the tools/functionality.
As for our axo plug-in, keeping the cost very reasonable while keeping the functionality lean, mean, and focused would be key. I agree with you - a cost in the $25-50 range would be the sweet spot for professional tech. illustrators.
Thanks for your input. Would love to hear from others as well.

-Greg

Re: Any interest in a new axonometric set-up tool for Ai?

Posted: Mon Apr 03, 2017 2:23 pm
by JamesProvost
I'd love to see them offer single plug-ins available for purchase, broken out separately from the complete CADtools package. This way, users could purchase only the specific plug-ins they need, to fit their workflow. Similar to Astute Graphic's model. And $350 is a chunk of change to plunk down for a plug-in that you may only utilize 10% of the tools/functionality.
100% agreed.
Yes, our app would be similar to the CADtools axonometric interface, but.......better IMO. [...] As for our axo plug-in, keeping the cost very reasonable while keeping the functionality lean, mean, and focused would be key. I agree with you - a cost in the $25-50 range would be the sweet spot for professional tech. illustrators.
Sounds promising!